|
东莞市万江拓创电子厂 
| 联系人：刘波 先生 (经理) |
 |
| 电 话：0769-88789588 |
|
| 手 机：13380195886 |
|
 |
|
 |
|
 |
|
| 供应Pedigree® 961 凡立水 |
厂商： ELANTAS PDG, Inc.
品牌： Pedigree® 961 Insulating Varnish
111
Description
The Pedigree 961 is a solvent
containing general purpose varnish. It
has an outstanding field history in a
variety of applications.
Uses
- Impregnation of stators, motors and
coils
Cured Properties
The Pedigree 961 has good electrical
and mechanical properties.
Catalyst
None Required.
Recommended Cure
After unit reaches temperature,
1 hour at 150°C (300°F) or 4 hours at
135°C (275 °F)
Features and Benefits
- Can be thinned with low cost solvents
- Good stability
Application Methods
- Dip and Bake
Transportation/Storage/Shelf Life
This resin should be stored at 25°C
(77°F) in a dry controlled environment
out of direct sunlight. This material
should be suitable for use stored under
these conditions in the original sealed
containers for twelve (12) months from
the date of shipment. Failure to store
this product as recommended above
may lead to deterioration in product
performance and invalidate shelf life.
Agitate before use.
Properties of Material Supplied
Test Value Units
Viscosity @ 25°C (77°F)
(ASTM D2196) 150 – 250 cP
Percent non-volatile matter
(ASTM D115) 47 – 50 %
Flash Point (ASTM D93), typical 18 (64) °C (°F)
Mass Lid Gel @ 150°C (300°F) < 60 minutes
A member of
Pedigree® 961 Insulating Varnish October, 9 2009 Rev. 3
TYPICAL PROPERTIES
Mechanical Properties – Double Dipped, Cured 2 hours at 150°C (300°F)
Test Value Units
Helical Coil Bond Strength @ 25°C
(77°F) (ASTM D2519) MW35 36 Pounds
Helical Coil Bond Strength @
150°C (300°F) (ASTM D2519)
MW35
由于文字太多无法一一说明 如有疑问请联系我们 谢谢 |
 |
| |
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。